Products
Advanced Items
Tiny |
Thin① |
Thin② |
Straight knurls on exceedingly small sized blanks |
1mm thickness, 2mm width |
Inner flange of 3mm-thickness is formed by only cold forming |
High precision① | High precision② | High precision③ |
Range of dimensional tolerance (inside diameter) is 0.02 End face’s run-out based on inside diameter is 0.02 End face’s flatness is 0.02 |
Range of dimensional tolerance (inside diameter) is 0.03 |
Made by only cold forming |
High Precision④ | Deep hole① | Deep hole② |
Range of dimensional tolerance (outside diameter of a boss above a flange) is 0.02 |
Blanks with a flange despite of its 29.3mm-depth hole |
Same thickness(0.08) of its bottom and side |
Intricate shape | Thickness deviation | Gear |
Added an extra work on its counterbored hole |
Thickness deviation item made by least possible material |
Forged gears with no waste material at all |
Aluminum item① | Aluminum item② | Aluminum item③ |
Contributed to lighter weight Zero or less emission of hazard materials Reduction in surface treatment Lower scrap by rolled tap |
||
YN’s original insert nut | ||
Made by only cold heading No need of any second operation |